How to Install a Ghost Immobiliser
Ghost immobilisers can be an effective deterrent for car thieves. By combining this device with other security systems and remaining vigilant, you can create an effective defense against the latest, technologically advanced thieves.
Ghost immobilisers will shield your car from hotwiring and relay car thefts by requiring you to enter an identification number to start the car. It uses buttons on your steering wheel or the centre console, making it invisible to criminals.
Identifying the Wires
With increasing numbers of vehicles being taken away without the owner's keys, it is important to protect your vehicle. While thieves might be able to clone your key fob, or even steal the vehicle by hacking its system and stealing the vehicle, a ghost immobiliser provides an additional layer of protection by blocking all signals from the key fob and making it impossible to start your car without entering a PIN.
You can install the ghost immobiliser your own, but it is recommended to hire a professional to do the work. A skilled technician will know where to put the unit in, and also how to properly connect it to your wiring of your vehicle. The process of installing it is not easy and it is vital that the connections are done correctly to avoid any issues or malfunctions.
To get the best results, you must work in a well-lit area and wear the appropriate safety equipment. Also, you should go through the user's guide to get familiar with the wiring system. This will enable you to determine the wires needed for the installation, and ensure you have the right equipment and components.
After the wiring is connected, you can connect the battery and test the system to determine if it is functioning properly. To prevent electrical problems be sure that the battery's terminals are secured. You should also mark the CAN L and CAN H wires with labels or tape to be able to keep track of them during the installation process.
If you would like to allow someone else to drive your vehicle temporarily, such as for valet parking or when your vehicle is in for a service, the Ghost Immobiliser can be put into Transport Mode. You can enter the code using an option on the steering column, centre console or door panels. Then, the Ghost Immobiliser enters PIN mode that allows for changing of the code.
Some thieves attempt to evade ghost immobilisers through jamming and spoofing devices that block or send fake messages to the system. This can be avoided by investing in anti-jamming devices and by regularly checking your Ghost immobiliser for indications that it has been altered with.
Disconnecting the Battery
The ghost immobiliser is a modern security device, is designed to stop car theft. It uses innovative technology to monitor and disable the engine when the correct PIN code is entered, thereby stopping the vehicle from being driven away by thieves. The system is extremely effective and stealthy. It has no visible indicators to discourage criminals. However, there may come an occasion when you have to remove the device to perform maintenance or upgrades, or to sell your car.
ghost ii immobiliser requires special tools and skills, since you will be working using wires and bypassing specific factory components. It is also essential to follow the step-by-step directions given by the maker of the ghost immobiliser. It is also recommended to consult a professional mechanic or auto electrician, particularly if you don't have any prior experience working on cars.
After identifying the wires and disconnection, it is important to verify the condition of your battery. Ensure that it is clean and free of corrosion, and that the connections are secure. Consider replacing the battery if necessary to ensure it is sturdy enough to meet the electrical demands of a security aftermarket.
After you have disconnected the wiring you can take off the ghost immobiliser. Wire cutters or strippers can be used to disconnect the wires. Be careful not to damage the terminals of the wires. Make sure you label each wire to ensure that you are able to reconnect them properly in the future. If the wires are soldered, use a tool that is heat-resistant to break the connection. To avoid short-circuiting, is essential to wrap the wires with insulation tape or heat shrink tubing.
Connect the wires using the constant 12V power source. If required you can use a fuse tap to ensure that the connections are protected by fuse. Connect the grounding wire to an adequate grounding on the chassis of your vehicle.
Once you've reconnected your wires, restart your vehicle and enter the code PIN. Then, start the engine. If it fails to start the ghost immobiliser has been removed successfully.
Making the Connections
Ghost immobilisers are an affordable solution to increase the safety and security of your vehicle. It connects to your vehicle's CAN bus system, which intercepts signals and preventing the engine from starting unless the correct PIN code is entered. This device is practically impossible to bypass, making it an ideal choice for motorists who want additional security and peace of mind. It can help lower the cost of insurance when used in conjunction with the Thatcham Approved Tracking System.
The process of obtaining and reviewing the wiring diagram of your vehicle model will be essential in the installation process. The diagram serves as a guideline for finding the wires required to create precise connections. The connection will last and secure if you choose the correct wiring connectors or the correct soldering method.
The wires that connect the Ghost immobiliser to the CAN bus system need to be identified and connected correctly. Use small labels or tape to identify the CAN L and CAN H wires. This will prevent confusion during installation. The position of these wires will be different on every vehicle, so it is important to consult the wiring diagram of your vehicle and online resources to identify them.
After the correct wires are connected After the correct wires have been connected, the power to the Ghost immobiliser will be restored. It is a good idea to test the immobiliser. Start the engine, but do not enter the code. This will confirm the immobiliser is installed correctly and is functioning as it should. It is essential to test your immobiliser on a regular basis. This will allow you to detect any issues or problems early.
The ghost immobiliser can be installed quickly and without modifying your vehicle's wiring. It is also an excellent option for those who want to increase the security of their vehicles, as it can be used in conjunction with a Thatcham-approved alarm or tracker that will send a notification to your phone or tablet when the vehicle is damaged.
Mounting the Unit
The Ghost immobiliser works well as an effective deterrent for car thieves especially when paired with a GPS tracking device. It uses buttons on the centre console, door panels, and steering wheel to generate an exclusive sequence that only you know to stop your car from starting. The unit is also weatherproof and tamper-proof. It also comes with a three-year warranty and is recommended by a variety of insurance companies.
When installing the system, it's important to follow the directions carefully. If you're not sure, it is best to seek out an expert. A wire stripper and multimeter are essential tools for identifying the wiring and making precise connections. It's also a good idea to purchase some electrical tape and insulation for protecting the connections from potential damage. Once the installation is complete, it's a good idea to check the device to confirm that it's functioning as intended.
Ghost immobilisers are a fantastic method to protect your car especially in areas that have high rates of crime. It prevents key cloning, ECU swapping and other security threats. It can be linked to an iPhone application to make it easy to manage and monitoring. It's popular among car owners who want to secure their investment.
The Ghost II immobiliser features a elegant design and low profile which makes it invisible to thieves. It is connected to the CAN (Controller Area Network) system in your vehicle. It prevents the engine from being started without a PIN code being entered. The PIN code is generated with a unique sequence of buttons on the steering wheel or centre console, or on the doors. Ghost 2 immobiliser is able to be changed at any time. The device is also tamper-proof, and includes an GPS tracking system that will assist police in locating your car in the event of theft. It's an excellent option to protect your vehicle from thieves, and it's Thatcham-approved.